RisingHF RHF2S208 Outdoor LoRaWAN Gateway
RHF2S208 developed by RisingHF is a new generation GW with LoRa®/LoRaWAN® compliant which supports Full Duplex communication with up to 16 channels (with Multi SFs). The GW integrates one 1.2GHz ARM Cortex-A53 CPU which runs Linux OS. And also 1x or 2x SX1301 to provide LoRa® transmit and receive functionality. SX1301 is a high-performance LoRa® processor developed by Semtech. The 2 x SX1301 full duplex hardware version will extend the network capacity to more than 2x compared to the traditional 8 channels half duplex one.
Product Description
The gateway is backhaul via 10/100M Ethernet or LTE. An onboard GPS module could be used to generate a PPS signal for synchronization. Furthermore, an internal web UI is integrated for quick configuration and fault diagnosis analysis and maintenance. Benefiting from the RHF2S208 WIFI interface, customers could use devices like PCs or laptops to connect with it directly to initial, configure or debug when needed. Various power supply plans are supported, like DC injector, PoE, and internal LiFePO4 battery. It also provides an acid battery charged with solar panels choice.
Main Features:
Maximum output power：25dBm
High sensitivity：-140dBm@300bps
Half duplex or Full duplex optional
Optional(8 or 16) uplink channels
LoRaWAN® downlink: 1 normal channel(125kHz/250kHz/500kHz LoRa® configurable or GFSK)
LoRaWAN® Antenna Gain：2dBi
Compatible with PoE IEEE 802.3 af/at
10/100M Ethernet or 4G modem(WCDMA/TD-LTE/GPRS/EDGE) for networking
synchronization with GPS PPS signal
Quick configuration and maintenance through WiFi
USB interface for debug
Power supply： DC jack， PoE and internal LiFePO4 battery
Up to 4hr duration time with a backup battery
Support acid battery charged with solar panels
Operating temperature: -40°C to +75°C
Waterproof level: IP67
10kA surge protection
Applications
- M2M，IOT，and LPWAN
- Wireless sensor network
- AMR
- Industry 4.0，Industrial monitor
- Wireless remote control and monitor
- Smart Home, Smart building, Smart community and Smart city;
- Wireless alarm and security
- environment monitor
Features
-
LoRaWAN half-duplex or full-duplex operation mode available;
-
RHF2S208xx8 series: Uplink include 8 multi-SF LoRa channel, 1 single-SF LoRa channel, and 1 GFSK channel;
-
RHF2S208xxF series: Uplink include 16 multi-SF LoRa channel, 2 single-SF LoRa channel, and 2 GFSK channel; (No Release yet)
-
Output power achieve to 27dBm max， receiver sensitivity as low as -141dBm@300bps;
-
Support LoRaWAN ClassA/B/C mode；
-
Support PoE IEEE 802.3 af/at;
-
Support 10/100M Ethernet connection and GPRS/3G/4G connection，switch automatically;
-
Supply with 100m cable via PoE;
-
High reliability industrial device, IP67 device，easy to setup LPWAN network outdoor
-
Quick configuration and maintenance through WiFi;
-
Power supply：DC jack，PoE and internal LiFePO4 battery
-
More than 4hr duration time with backup battery
-
-40℃ to +75℃；
-
10kA surge protection
-
Water proof level: IP6
Technical Parameters and Specifications
| Item Group | Item | Description |
|---|---|---|
| System Configuration | Core | ARM Cortex-A53 |
| Main Frequency | 1.2GHz | |
| RAM | 1Gbytes | |
| Flash | 4Gbytes eMMC | |
| Communication | Wired Network | Ethernet 10M/100Mbps |
| Mobile Cellular | GSM/3G/4G Wireless connection | |
| LoRaWAN | Long Range Wireless Communication | |
| Electrical Specification | Power supply input | External DC Jack (default); PoE +48 Input compatible with IEEE 802.3 af/at; Internal battery back up available (RHF2S208Bxx only); |
| Average Power Consumption | 5.5W | |
| LoRa Output Power | type：14dBm@868MHz；17dBm@470MHz Max：27dBm |
|
| LoRa Sensitivity | -141dBm@SF12,BW=125kHz | |
| Sensor | Temperature | Monitor device internal temperature |
| User Interface (External) | Mobile Cellular 4G Antenna | Connect gateway with internet |
| LoRaWAN Antenna | LoRaWAN transceiver, IoT data collection | |
| Ethernet | Connect gateway with internet | |
| GPS | GPS function | |
| WiFi | WiFi accessing | |
| USB | USB interface | |
| Power supply | Power supply input | |
| User Interface (Internal) | Standard SIM Card Slot | Support Standard SIM Card (25mm×15mm ×0.8mm) |
| USB | USB bootloader (Device Firmware Upgrade) | |
| UART | UART Terminal for debugging | |
| LED400 (Internal) | System indicator | |
| LED600 (Internal) | Ethernet full/half duplex indicator | |
| LED601 (Internal) | Ethernet link status indicator | |
| LED602 (Internal) | Ethernet data speed indicator | |
| LED206 (Internal) | Charging indicator | |
| LED207 (Internal) | Charged indicator | |
| LED500 (Internal) | 4G modem | |
| Dimensions Installation | Dimensions | 210x 200x 85 mm |
| Weight | 2100g (RHF2S208Exx) 2510g (RHF2S208Bxx) |
|
| Installation | Derrick installation, Fixed on the wall | |
| Operating Range | Operational temperature range | -40 to +75°C |
| Storage temperature range | -40 to +85°C |
Hardware:
CPU: ARM Cortex-A53
Main Frequency: 1.2GHz
Memory: 1Gbytes RAM, 4GB eMMC
Hardware Watchdog
RTC
Internal Temperature Sensor
PoE module;
GPS module;
WiFi module;
Internal battery back up;
LoRaWAN Module x1/x2;
4G Modem (For China version, RHF2S208xxx-434, RHF2S208xxx-470)：
FDD LTE: Band 1, Band 3, Band 8, all bands with diversity
TDD LTE: Band 38, Band 39, Band 40, Band 41, all bands with diversity
DC-HSPA+/HSPA+/HSPA/UMTS: Band 1, Band 5, Band 8, Band 9, all bands with diversity
TD-SCDMA: Band 34, Band 39
GSM/GPRS/EDGE: 1800 MHz/900 MHz
4G Modem (For International version, RHF2S208xxx-868, RHF2S208xxx-915)：
FDD LTE: Band 1, Band 2, Band 3, Band 4, Band 5, Band 7, Band 8, Band 20, all bands with diversity
WCDMA/HSDPA/HSUPA/HSPA+: Band 1, Band 2, Band 5, Band 8, all bands with diversity
GSM/GPRS/EDGE: 850 MHz/900 MHz/1800 MHz/1900 MHz
Software:
-
Based on Linux Kernal
- Version: 4.14.34-v7+
-
SPI Driver
-
I2C Driver
-
USB Host/Device Driver
-
LoRaWAN module Driver
-
4G Modem Driver ( Supports GSM/GPRS/3G/4G communication)
-
GPS driver to support synchronization
-
Ethernet driver
-
WiFi accessing driver;
-
DMA Driver
-
Power and charging Management Driver
-
Temperature Sensor Driver
-
Watch dog
-
RTC;
Bootloader：
-
Support image programming
-
Support USB downloading
-
Support USB booting